Basic design and operation (View - 1382 times)
November 2, 2016 10:30 am
When user has selected the appropriate zone that he wants to send the message using Graphical User Interface (GUI), main controller will generate Dual Tone Multi Frequency (DTMF) tone containing the zone and the exact location. This signal is then amplified and passed through a loop around the area of consideration .When the relevant zone controller picks up the signal, corresponding communication link is activated and the GUI will indicate the ready status. Now, the relevant communication can be carried out. Then, a feedback signal is generated within the zone controller, passes to the main unit and indicates the status of the activity.
Two controllers have designed; one for the major unit and another for each zone. Required zones are selected and DTMF signals are generated in major unit. Relevant signals are picked up, speakers are activated and the feedback signals are generated.
Source =
We have selected to develop a low cost public address system suitable for large Institutions, as nowadays it is becoming major requirement for large institutions. In our project we have focused on developing a public''' ....Read More
November 2, 2016 12:13 pm
Dual Tone Multi-Frequency (DTMF) is a method of instructing a telephone switching system to dial telephone numbers, or to issue commands to switching systems or related telephony equipment. It reliably sends the data across long''' ....Read More
November 2, 2016 10:32 am
When user has selected the appropriate zone that he wants to send the message using Graphical User Interface (GUI), main controller will generate Dual Tone Multi Frequency (DTMF) tone containing the zone and the exact''' ....Read More
November 2, 2016 10:30 am
Even though large institutions like schools, hospitals, etc has the same requirement only private institutions can afford this kind of facility due to high cost. Hence we have minimized the total cost, while fulfilling all''' ....Read More
November 2, 2016 10:23 am
A public address (PA) system is an electronic amplification system used as a communication system in public areas. It also refers to an audio transmission system used in institutional and commercial buildings, in which input''' ....Read More
November 2, 2016 10:19 am
Total cost is the summation of cost of main controller, cost of zone controllers and cost of cables, speakers and installation. For a design with16 zones, the cost for the Main and Zone controllers is''' ....Read More
November 1, 2016 10:30 am